4-in-1 Wi-Fi Range Extender
It supports four modes of AP/Repeater/Router/Client to meet users' different needs. This repeater also supports WPS one-button setup with simple and convenient connection, suitable for home, travel, office, etc.
Boost Wi-Fi Coverage up to 300㎡
Hosome Wi-Fi range extender comes with two external 3dBi smart omnidirectional antennas for more stable signal and wider coverage. It can boost the Wi-Fi coverage up to 300㎡ in an open space, effectively eliminating the trouble of Wi-Fi dead zones for users.
- Wireless Standard: IEEE802.11n/g/b
- Frequency Band: 2.4 GHz
- WiFi Speed: 300Mbps
- Work Mode:AP/Router/Repeater/Client
- Chip Solution: RTL8196EU+RTL8192ER
- Antenna: 2*3dBi Antenna
- Button: 1 WPS/RST Button
- Interface: 1 10/100 Mbps Ethernet Port
Intelligent & Humanized Design
The intelligent LED indicator will show the running status: blue LED in AP/Router mode; in Repeater mode, red LED for bad signal and green LED for good signal. Both sides of the booster are designed with heat dissipation holes for great dissipation effects, low consumption, low radiation and environmental protection.
1200Mbps Wi-Fi Transmission Speed
Hosome Wi-Fi booster adopts 11AC wireless technology that can reach 1200Mbps Wi-Fi speed for watching videos, playing games more fluently! It supports 2.4GHz and 5.8GHz dual bands to work simultaneously, ensuring faster speed with dual channels.
Stable Signal & Wide Compatibility
Qualcomm dual chips QCA9531 + QCA9886 provide strong signal. The Wi-Fi extender is designed with one 10/100Mbps Ethernet port and complies with IEEE802.11b/g/n standard. It supports wired connection and works with most of mainstream routers and wireless cards in the market.
Under the Repeater Mode,the device can capture and receive the wireless signal at a long distance, then transmit the signal in order to extend the coverage of the Internet.
When the device is set up in the AP Mode, the repeater will transfer the wired network to the wireless signal. Then you can connect other devices such as TV，computer, game equipment, etc. This mode will achieve the effect of using the Internet more flexible and break the limitation of the wired network.
The Router Mode is access the router or the wired network, the wireless signal can be forwarded through the router mode,and other devices can receive it easily.
|Dimensions||185 x 60 x 22 mm / 7.3 x 2.4 x 0.9 inches|
|Weight||180 g / 6.3 oz|
|Wireless Type||IEEE 802.11n/g/b(2.4GHz)|
Q: Can I use this Wi-Fi range extender as a router?
A: Yes. Switch it to router mode, then it can connect the network and emit Wi-Fi signal; so that other devices can surf the internet easily.
Q: How to restore factory settings?
A: Long press Power/Reset button for about 15s until the indicator flashes, then you can restore factory settings.
Q: Wi-Fi signal cannot be accessed after expansion?
A: If the status LED of device is green, it indicates that the expansion is unsuccessful; Please check the password is correct or not; if no, please enter the correct password again.
Q: The network speed is very slow after Wi-Fi expansion?
A: Maybe the distance between device and main router is too long, the position of range extender needs to be adjusted reasonably.
Q: The Wi-Fi speed is reduced?
A: Check the IEEE 802.11 protocol (11b:1/2/5.5/11Mbps，11g:6/9/12/18/24/36/48/54Mbps，11n：300Mbps) in WEB interface. IEEE 802.11 protocol is suggested for use.
Q: Can any cellphones be connected with this Wi-Fi range extender for setting?
A: Support cellphone, tablet, PC, accessible from almost any device, including iOS and Android mobile platforms; support WPS one-button setup and long press RST button to restore factory settings.
Q: Why is there no network after connecting the extender?
A: Log in to the WEB interface, select the wireless AP mode to enter the operation interface and select to access the Wi-Fi that needs to be extended.
Q: Why does the WLAN repeater always disappear and then start over?
A: Hello, there are two situations that cause this problem. 1. The repeater is placed beyond the connection range. 2. Power supply problem. Corresponding solutions: 1. Please connect within the range indicated in the manual. 2. Please confirm that the power plug is connected.
Q: Can it still work normally from the 1st floor to the 5th floor?
A: Depending on the environment and thickness of the wall, it may not work properly.
Q: How to unpair the repeater from the superior router?
A: Log in to the WEB interface to replace the signal source or restore the factory settings.
Q: It didn't pop up the login page when I connected for the first time. What should I do?
A: You can quit and try again. If there is still no jump, you can open a browser and input 192.168.10.1 to enter the login page.
Q: Is the signal of this repeater stable?
A: I feel very good. I put it on the 2nd floor room and can receive a stable signal.
Please allow up to 72 hours for order processing. Litlit team will prepare items, check quality and pack your order with care before shipping.
All Litlit orders are sent via registered air mail if not specified in product page. With a small amount of extra charge, you can choose to expedite shipping at checkout. All orders will be provided with a tracking number once shipped out.
|Destination Countries/Regions||Standard Shipping||Express Shipping|
|United States (Lower 48 States)||6-11 days||4-8 days|
|Canada||6-14 days||4-8 days|
|United Kingdom (Mainland)||6-9 days||3-6 days|
|France (Metropolitan)||6-9 days||3-6 days|
|Austria, Czech Republic, Germany, Italy, Netherlands, Spain, Switzerland||6-10 days||4-7 days|
|Belgium, Denmark, Ireland, Luxembourg, Malta, Norway, Poland, Portugal, Sweden||8-12 days|
|Albania, Belarus, Bulgaria, Croatia, Georgia, Greece, Hungary, Lithuania, Romania, Slovakia, Slovenia, Turkey, Ukraine||8-15 days|
|Other Countries/Regions||7-20 days|
Shipping time above is the estimate of shipping in business days. It is based on the most common cases (more than 90%) of our shipping history in each destination country/region. Not a guarantee of delivery time.
Please make sure you put a valid recipient name and phone number in the order. Litlit.com is not responsible for delivery failure due to wrong shipping address.
Litlit supports the following payment methods:
More payment methods are available at checkout. Let us know if you need to pay with a specific gateway.